Accessories - Reed

Replacement Headshell (AA)

Replacement Headshell (AA)

Dedicated to customers, who have more than one cartridge, and like to switch it from time to time. When using spare headshell, there's no need to remove the cartridge and then to fix and adjust it again and again.

MSRP from 65 EUR

Replacement Headshell (no AA)

Replacement Headshell (no AA)

Dedicated to customers, who have more than one cartridge, and like to switch it from time to time. When using spare headshell, there's no need to remove the cartridge and then to fix and adjust it again and again.

MSRP from 65 EUR

Weight for Counterweight

Weight for Counterweight

Our tonearms are compatible with virtually any cartridge. To achieve it, one of the most important factors is to choose right weight of tonearm's counterweight. Our tonearms come with default counterweights depending on their effective lengths (you can always ask your dealer to supply you with counterweight, which differs from default), but counterweight weights can be also purchased separately. We offer following options:

  • Stainless steel, "half size" counterweight. Weight: ~40 grams. Default for 9.5" tonearm
  • Stainless steel, "full size" counterweight. Weight: ~60 grams. Default for 10.5" tonearm
  • Stainless steel, tungsten core counterweight. Weight: ~105 grams. Default for 12" tonearm

Armwand Box

Armwand Box

When you have a tonearm that allows swapping its armwands, like our Reed 5T or Reed 2G (with replaceable armwand option), you most probably will have a few armwands as well. To keep that fragile gear in one place, use this plywood box for four armwands up to 12 inch.

MSRP :290 EUR

Reed Mat

Reed Mat

Good turntable mat is known for reducing LP friction, dampening vibrations and avoiding static build-up. Reed leather mat goes in two colours - black and sand white and is packed in a handy sleeve.

MSRP : 140 EUR

Reed Strobe

Reed Strobe

Strobe device is a handy tool for verifying stability of speed of turntable platter. Reed Strobe has settings for speeds of 16, 33 1/3, 45 and 78 RPM.

MSRP :  500 EUR

Headshell Box

Headshell Box

If you have more than one cartridge, you most probably switch them along with the headshells to save time adjusting their mounting over and over again. To have all your cartridges and headshells in one place, use this nicely crafted plywood box.

MSRP : 250 EUR

Source 12V Power Supply

Source 12V Power Supply

Reed Source 12V power supply is dedicated for powering hi-end audio equipment. Usually equipment is powered from the mains – 240VAC – 110VAC alternating current electric power supply, and then current is converted to direct (DC) using linear or switching converters. Quite often mains supply voltage is noisy and cluttered with interference from a surrounding electrical power users. This interference may pass through converters and can have quite strong negative impact to hi-end audio equipment performance. A solution for this problem could be Reed Source 12V – battery power supply, which accumulates energy in two nickel-metal hydride (NiMh) battery modules.

Contacts

icon_home102 Ilioupoleos, Dafni, 17237, Athens

icon_call+30 213 027 7796 
+30 697 22 88 374

icon_mailSend mail via our Contact us